BELL BOND X-100 SOLDER PASTE

LEAD FREE
CORROSION RESISTANT
Tin, Antimony and Copper

· Apply the flux coat to the radiator
· Apply Bell Bond X-100 over the flux coat
· Heat in the oven at approximately 675 degrees Fahrenheit for 5-6 minutes
· Bell Bond X-100 allows you to apply the product using a suction feed sand blast gun in place of a paint sprayer because it has a larger nozzle capacity.
· Bell Bond X-100 can be applied using a brush for surface applications, but limits the depth of penetration compared to the spraying process.

Physical Properties

Other Advantages

Safety

Cost Savings

Application

· Eliminates the energy cost of operating a molten solder vat
· Reduction in time need to complete the process
· Est. 30 minutes for the conventional face dip process
· Est. 6 minutes with Bell Bond X-100 process
· Increases the durability and extends the life of the radiator

· The molten solder vat is a safety hazard for any company using the process. X-100 reduces the probability of an employee being splattered with hot metal or falling into solder vat.
· X-100 is LEAD FREE!!

· Radiators can be resurfaced more than once
· When using 95-5 to replace lead products, erosion can occur in the solder vat. Bell Bond X-100 eliminates the solder vat all together.
· X-100 works on Automotive Serpentine Fins (not possible with conventional process)
· X-100 does not cause the core tubes to expand and kink
· Eliminates risk of plugging up tubes
· Environmentally friendly
· Easy to use
· Face dip a core that has already been manufactured
· No Zinc Chloride Flux
· Simple to train employees

Melting Point 441 – 468 Degrees F
Tensile Strength PSI 9,800
Brinnell Hardness 23